Loaner Tools

How do you find out what tools are available in the loaner tool program?

I was starting a list but I only had info on 1 tool.
It looks like Ed is going to take care of all the tools now so mabe I can get a complete run down with pictures.

To answer your question, ask Stan or James

denhamfly;11503 wrote: How do you find out what tools are available in the loaner tool program?

Currently there is one tool in the library, it is the fender roller tool. Intent is that all such tools will be listed in forums.928oc.org/vbulletin/forumdisplay.php?f=16 with $Tool as the prefix, so they will appear near the top.

The 928 OC does also have the 928 diag tool, but it needs a write-up in the above mentioned forum, and also someone willing to handle it. So far it has been lent almost exclusively to events.

Thanks for the info!!

The Theo diag tool (Holland) is the most up to date version of the Porsche Hammer which evolved into the Spanner which was developed/manufactured by John Speake, England which I believe is NLA.

I own one of these tools and with a little practice is quite easy to use. It is a diag tool and does not electronicaly repair but does a great job of reading both LH and EZK computers and engine sensors through respective diag ports and cables.

It also runs the PSD pump, great for service work.

The tools owners manual can be found on Theo website:

jenniskens.livedsl.nl/diag/Diag.htm

The Diagnostic Tool is in my house. It is on its way to Frenzy.